BETAFPV Pavo20 Pro II Replacement Whoop Duct – PA12

On a cinewhoop, the duct takes the hits for everything else. When a wall, a doorframe, or a very unforgiving tree comes up, the duct is what stands between your props and a bad day. If yours is cracked, scuffed, or just looking tired, the BETAFPV Pavo20 Pro II Whoop Duct gets your quad back in the air without rebuilding the whole frame.

It's moulded from PA12 with a thickened, reinforced cross-section built to shrug off crashes. The airflow design is more than armour, too: BETAFPV says ducted designs like this add 8–11% more thrust compared to ductless builds. At just 17.8g it keeps the Pavo20 Pro II light and quick. Available in Black to match the stock look.

Important: This duct is made for the Pavo20 Pro II (93.9mm wheelbase) only. It is not compatible with the original Pavo20 Pro duct, so don't mix generations.

• Fits: BETAFPV Pavo20 Pro II (3S and 4S versions)
• Material: PA12, thickened and reinforced
• Weight: 17.8g
• Wheelbase: 93.9mm
• Colour: Black

Includes: 1× Pavo20 Pro II whoop duct, 1× 130mm battery strap. Top plate, bracket, and hardware are sold separately.

Common Questions

Will this fit my original Pavo20 Pro?
No. This duct is designed for the Pavo20 Pro II only. The two generations have a slightly different wheelbase, so the parts don't swap.

Can I use it with the older carbon plate?
We don't recommend it. Mixing the Pro II duct with an older plate (or the other way around) can cause the props to touch the duct in flight. Keep to Pro II parts.

Does it work with both the 3S and 4S Pavo20 Pro II?
Yes. The duct is the same part on both versions of the Pavo20 Pro II.

What is the duct made from?
PA12 (a tough nylon-type plastic) with a thickened, reinforced cross-section designed to take crash impacts.

Do I need anything else to install it?
This listing is the duct and a 130mm battery strap only. You'll reuse your existing top plate, bracket, and screws, so check that your hardware is in good shape before you rebuild.