{"product_id":"betafpv-lava-1104-7200kv-motor-pavo20-pro-pro-ii-3s","title":"BETAFPV LAVA 1104 7200KV Motor – Pavo20 Pro \/ Pro II, 3S","description":"\u003cp\u003eBent a shaft in the carpet, or planted a motor into a tree? The \u003cstrong\u003eBETAFPV LAVA Series 1104 7200KV Brushless Motor\u003c\/strong\u003e is the direct replacement for the \u003cstrong\u003e3S Pavo20 Pro and Pro II\u003c\/strong\u003e. It has plug-in leads, so swapping one takes minutes and you're back in the air.\u003c\/p\u003e\n\n\u003cp\u003eThese motors are built for \u003cstrong\u003e2.2\" cinewhoops\u003c\/strong\u003e and deliver smooth torque for swift, controlled freestyle. With Gemfan D2.2 3-blade props, BETAFPV measured \u003cstrong\u003emax thrust above 230g\u003c\/strong\u003e and a \u003cstrong\u003ethrust-to-weight ratio over 5:1\u003c\/strong\u003e. Efficiency is up to \u003cstrong\u003e4.7g\/W at low throttle\u003c\/strong\u003e and \u003cstrong\u003e1.9g\/W under full load\u003c\/strong\u003e, which keeps flight times healthy while you're flying hard.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAbout \"24mm\":\u003c\/strong\u003e That's the length of the motor wires, not the motor size. The 24mm version has a \u003cstrong\u003eplug-in connector\u003c\/strong\u003e made for the Pavo20 Pro and Pro II. The 7200KV motor is the \u003cstrong\u003e3S\u003c\/strong\u003e option (the 4S Pavo uses a 5500KV motor).\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKV:\u003c\/strong\u003e 7200KV (3S) | \u003cstrong\u003eWeight:\u003c\/strong\u003e 5.3g\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax power:\u003c\/strong\u003e 122.5W | \u003cstrong\u003eMax current:\u003c\/strong\u003e 10.2A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShaft:\u003c\/strong\u003e Ø1.5mm, 5mm long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWires:\u003c\/strong\u003e 28AWG, 24mm, with connector\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMotor mount:\u003c\/strong\u003e 4× M2 on a Ø9mm pattern | \u003cstrong\u003eProp mount:\u003c\/strong\u003e 4× M2 on a Ø5mm pattern\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended props:\u003c\/strong\u003e Gemfan D2.2 3-blade (1.5mm shaft)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended battery:\u003c\/strong\u003e LAVA II 3S 580mAh \/ 680mAh\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eIncludes: 1× LAVA 1104 7200KV brushless motor, 4× M2×4 hex flat-head screws, 4× M2×5 hex flat-head screws. Sold individually. A full set needs four.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eWhich quads is this motor for?\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\nIt's made for the BETAFPV Pavo20 Pro and Pavo20 Pro II. The 7200KV version is for the 3S build, and the plug-in 24mm leads match the stock motor connectors.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eWhat does \"24mm\" mean?\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\nIt's the length of the motor's wires. The 24mm version includes the plug-in connector for the Pavo20 Pro and Pro II. The 80mm version has long wires and no connector.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eIs this for 3S or 4S?\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\n3S. The 7200KV motor is the 3S option, while the 4S Pavo20 Pro II uses a lower-KV 5500KV motor. Don't mix KV values on one quad.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eHow many motors come in the pack?\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\nOne motor, with screws. You need four for a full set, and one or two spares is a smart idea if you fly indoors or in tight spaces.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eWhat props should I use?\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\nGemfan D2.2 3-blade props with a 1.5mm shaft. On the Pavo20 Pro II the props are screw-fixed through the motor's 4× M2 mount, which keeps them from working loose.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eWhat's in the box?\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\nThe motor plus four M2×4 and four M2×5 hex flat-head screws.\u003c\/p\u003e","brand":"BETAFPV","offers":[{"title":"Default Title","offer_id":53105036624152,"sku":null,"price":18.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0948\/1122\/6392\/files\/LAVA_Series_1104_5500KV_Brushless_Motors_540x_679f9700-43cd-4868-ba3e-0348e83a6512.webp?v=1793503379","url":"https:\/\/launchpadfpv.ca\/products\/betafpv-lava-1104-7200kv-motor-pavo20-pro-pro-ii-3s","provider":"LaunchpadFPV","version":"1.0","type":"link"}